@TcoloT-AdolfoZameza wrote:
I got mixed news
a good new....
i was able to add and view a non default configuration 3810 device, i could look out the vlan configuration and some advanced configs using the Troubleshotting tool.
a bad new....
if you want to add the swtich statics to a group... you are toasted... the group config will overwritten to the switch. You will loose all the vlan, ports etc stuff.
If you choose to do it by the CLI sniplet, these changes wil be not displayed in the vlan section
it is the way supposed to be working.
worst news...
if you choose do not put the new switch with no default configuration to any group Aruba central display an annioing message to import the config to a group.
this message remains even after you unsuscribe the switch and put it on a diferent group (ie default).
the only way to get rid of this message, is going to the reports secction, next go to the offline switch secction and delete the offending switch.
i was not whorty the effort to get the switches on aruba central if you have to do twice the config... vlan, ports and other stuff by using the Aruba Central UI and the rest using CLI Snipplet.
i am dissapointed...
Hello Team,
I had exactly the same experience i have some aruba 2540 that they already have configuration (port,vlan,static ip configured for managment etc) in order to make central to see the switch you have to subscribe the switch in the central assigne it to customer if you are in msp mode and from the switch give "activate provision force"
and check with "show activate provision" version should be the latest 16.06.
The problem i have is that when is not assigned to any group everything look nice and fine but you have the alert message.
If you try to add it in a group(UI) you lose everything as mentioned above.If you put it in template group you keep the config but you lose the UI configuration.
What i have found as a workaround is to use import configuration in a group this makes your preconfigures switch working fine.
But i am wondering if you have 30 switches you need to create 30 Groups ?
Does anybody have any newer update ?
Thank you