Community Feedback

Reply
New Contributor

IAP387 Reviewing 60 gHz Radio

I have AP387 in instant cluster providing mesh link peer to peer. When I look at the mesh link and at radio profiles, I only see entries for 5 gHz and 2.4 gHz for this AP cluster.


Do you know how to view the 60 gHz channel utilization and data?

MVP Guru

Re: IAP387 Reviewing 60 gHz Radio

The IAP-387 does not have a 2.4GHz radio, it has 1x 5GHz and 1x 60GHz. Are you running on the latest firmware?

 

Please check this post on how to set up the IAP-387 in standalone mesh mode which probably is what you want.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
New Contributor

Re: IAP387 Reviewing 60 gHz Radio

Thanks for the info. I know the aps have only 60 gHz and 5 gHz radios on this model. However, the instant software only shows metrics for 2.4 and 5 gHz radios.

 

The aps are currently set up in standalone mesh mode and linked through the 60 gHz radio, but I can't find what channel it is using or its uptime.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: