Community Feedback

Reply
Highlighted
Occasional Contributor II

Outdoor plan in visualrf

Hello all ,

I have query on how to specify the ap if this is at outdoor/indoor or does it  take byitself after the selection of AP model, because our plan has both roof(Outdoor) and firstfloor(indoor) at same image .

Incase of openspace how do we specify the height ?

 

KIndly assist .

MVP Guru

Re: Outdoor plan in visualrf

Have you considered using the Outdoor planner for the outside portion? Within the Outdoor Planner you can specify the AP mounting height.

 

https://outdoorplanner.arubanetworks.com/


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor II

Re: Outdoor plan in visualrf

The following outdoor planner is only for outdoors or we can for indoor plans also  ?

As our plan has both indoors and outdoor at same floor plan .

 

Thanks in Advance

 

 

MVP Guru

Re: Outdoor plan in visualrf

To do this correctly, you would need another tool such as Ekahau or
AirMagnet if you wish for a single floor plan. if not split the floor plans
accordingly.

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: