Controller-less WLANs

 View Only
last person joined: one year ago 

Articles relating to existing and legacy HPE Aruba Networking products and solutions including IAP, Central / HPE Aruba Networking Central, MSR, and Outdoor Mesh
Back to Library

How do I configure and place different IAPs (Virtual controllers) into different groups using Aruba Central WebUI? 

Jun 18, 2014 05:34 PM

Introduction  
This article explains the steps to create different groups on Aruba Central WebUI and place different IAPs (Virtual Controllers) into different groups.
Feature Notes  
Using the Aruba Central dashboard, we can create multiple groups and place different IAPs in those groups.
Environment  
This article applies to all the IAPs running a minimum OS version of 6.2.1.0-3.3.0.0 and managed by Aruba Central.

 

 

Configuration Steps: 

 

 

To create a new group and to add a virtual controller to the group:

  1. Click on the drop down on the top left. This displays a list of all the existing groups. If you click on the icon on the left of the group, it will show all the VCs in that group.



1x.png


       2. Click on Add at the bottom.



2x.png



       3.  Enter the group name and select the VCs from the list that are supposed to be a part of that group. Click Save.


3x.png

 

After you have completed the configuration, you would see the selected VCs are displayed under the new group:



4x.png

Statistics
0 Favorited
1 Views
0 Files
0 Shares
0 Downloads

Related Entries and Links

No Related Resource entered.