That second screenshot, how do I get there, i don't don't see a tab with 'wired'.
My first AP just had an issue, he connected to the first AP in vlan 1 and it didn't issue dhcp, I checked and it looks like
the ip address that was showing was the ip his home router assigned him, because he had connected to his home network
for his last connection. So, it is like it doesn't want to update the ip, but it is hit or miss, sometimes it works on some machines.
Here is my issue, obviously others were or are having the same issue, but there was no answer on it:
http://community.arubanetworks.com/t5/Access-Points/AP-105-s-not-letting-clients-get-IP-via-DHCP/td-p/8184/page/3
UPDATE: I checked under more-->wired and found that the mode was set to 'trunk' I changed it to 'access' and to vlan 2 on the second AP, but it did nothing. I did the same to the other AP in vlan 1 and that did nothing.
At this point I am not even worried about the second access point, because the first one isn't functioning correctly it looks like and that one is setup the way it should be if you check the diagram I posted on the first page. I can't believe how frustrating this is. Time to buy some cisco AP's I think :p