Controllerless Networks

Reply
Contributor II

AAA test on IAP

Is it possible to do a AAA test from the VC on an IAP. Trying to setup a 802.1x SSID and it's not working. Not sure if you can test like you can on a real controller.

Guru Elite

Re: AAA test on IAP

Use the "aaa test-server" command from the CLI


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor II

Re: AAA test on IAP

Cool thanks. How do you access the CLI on those? Tried SSH1, SSH2 and telnet.

Guru Elite

Re: AAA test on IAP

You should be able to just SSH to the VC address. Do you have any firewall rules blocking SSH access?


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor II

Re: AAA test on IAP

Same subnet

Occasional Contributor I

Re: AAA test on IAP

command is there but only capable of doing PAP... no MSCHAP options available liek the controllers.

Trusted Contributor I

Re: AAA test on IAP

ssh / telnet is turned off by default i believe, at least then the AP has come from earlier version when ssh wasn't even possible.

 

you can enable it under System > General after turned on advanced options.

Re: AAA test on IAP

PAP is the only method currently.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACCA
[If you found my post helpful, please give kudos!]
New Contributor

Re: AAA test on IAP

@pmonardo - Sorry to bring back an old thread, but wanted to check...

 

If we can't use PAP (only PEAP or MSChap), is there a different test command we can use on the IAP VC?

 

Or is there no way to test those EAP types?

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: