Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Adaptive radio management assigned on 2.4GHz

This thread has been viewed 5 times

  • 1.  Adaptive radio management assigned on 2.4GHz

    Posted May 29, 2019 04:26 PM

    Hi

     

    I have 3 x IAP-205H with an Instant Controller but the 2.4 GHz channels used by all 3 IAPs are 11 on each IAP, I have had to use administrator assigned to use the non-overlapping channels (1,6,11) why does it not do this automatically if i use the default adaptive radio managed assigned?

     

    The reason I noticed this was because i was getting random disconnects from devices using the 2.4GHz band

     

    Thanks



  • 2.  RE: Adaptive radio management assigned on 2.4GHz

    MVP EXPERT
    Posted May 30, 2019 04:21 AM

    Is ARM enabled? With the defaults ARM will select either 1,6,11. However if the APs are not within earshot of each other and do not detect a sufficient amount of noise/interference then they may select the same channel if this is suitable.



  • 3.  RE: Adaptive radio management assigned on 2.4GHz

    Posted May 30, 2019 04:50 AM

    hi where can i tell if ARM is enabled?

     

    Thanks Craig



  • 4.  RE: Adaptive radio management assigned on 2.4GHz

    MVP EXPERT
    Posted May 30, 2019 05:15 AM
    Under RF -> ARM


  • 5.  RE: Adaptive radio management assigned on 2.4GHz

    Posted May 30, 2019 09:26 AM
      |   view attached

    when u say is arm enabled, i presume it wont work without arm? what exact setting constitutes arm being enabled, i have attached my arm tab screenshot