Controllerless Networks

Reply
New Contributor

Aruba 535 not showing up in Virtual Controller

The two Aruba 535 (FW 8.5.0.0-U) which I plugged in do not show up in the virtual controller as new APs. The Virtual controller is on an IAP325 (8.5.0.2) with a couple of IAP325 and IAP225. 

 

Also I cannot login (with admin / serial number) into the unified AP's 535. The error message is:  Login failed. Please re-enter Username & Password.

 

When I ssh into the unified AP535 with admin/admin I get the message: Warning: CLI is currently running in upgrade-only mode. Only upgrade operation is supported, other operations may not funcion.

 

Please advise 

New Contributor

Re: Aruba 535 not showing up in Virtual Controller

 
Highlighted
MVP Guru

Re: Aruba 535 not showing up in Virtual Controller

The IAP225/IAP325 use a different firmware version (Centaurus/Hercules vs Scorpio) to the AP535. Upgrade a single AP535 to 8.5.0.2 and introduce this to the cluster. Any additional AP535s will now be able to upgrade their image and join the cluster as well.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
New Contributor

Re: Aruba 535 not showing up in Virtual Controller

Cool thanks!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: