10-03-2019 03:32 PM - edited 10-03-2019 03:59 PM
The two Aruba 535 (FW 220.127.116.11-U) which I plugged in do not show up in the virtual controller as new APs. The Virtual controller is on an IAP325 (18.104.22.168) with a couple of IAP325 and IAP225.
Also I cannot login (with admin / serial number) into the unified AP's 535. The error message is: Login failed. Please re-enter Username & Password.
When I ssh into the unified AP535 with admin/admin I get the message: Warning: CLI is currently running in upgrade-only mode. Only upgrade operation is supported, other operations may not funcion.
Solved! Go to Solution.
10-04-2019 12:38 AM
The IAP225/IAP325 use a different firmware version (Centaurus/Hercules vs Scorpio) to the AP535. Upgrade a single AP535 to 22.214.171.124 and introduce this to the cluster. Any additional AP535s will now be able to upgrade their image and join the cluster as well.
ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)