Unfortunately I don't know if the status is Syncronized after the reboot and change then to unsyncronized. But I can see that the last conig Changed is when I was rebooting them.
show ap debug cloud-config-received:
timestamp: 2020-05-19 18:50:00
Airgroupservice airprint: OK
: Syntax error, skipped
exit: OK
show ap debug cloud-data-sent:
there is no Output from this show command received
show ap debug cloud-state:
A liste of all Clients which are connected to the cluster is received. here I put an example:
<MIB_CLIENT_TABLE> MIB_IS_WIRED(95) = 0
MIB_MAC_ADDRESS(1) = xx:xx:xx:xx:xx:xx
MIB_NAME(2) = xxxxxxxxx
MIB_IP_ADDRESS(5) = 172.29.60.107
MIB_PHY_TYPE(19) = 1
MIB_HT_TYPE(20) = 5
MIB_BSSID(31) = xx:xx:xx:xx:xx:xx
MIB_SNR(48) = 11
MIB_RX_RETRIES(49) = 0
MIB_TX_RETRIES(50) = 163
MIB_OS_TYPE(53) = Apple
MIB_USER_ROLE(80) = xxxxxx
MIB_IPV6_ADDRESS(137) = xxxx::xxx:xxxx:xxx:xxxx
MIB_VLAN(27) = 601
MIB_CLIENT_AUTHTYPE(135) = 0
MIB_CLIENT_AUTHSTATE(136) = 0
MIB_CLIENT_ACTIVE_STATUS(140) = 1
</MIB_CLIENT_TABLE>