--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------select port 80. You must also enable dynamic radius proxy under the advanced settings tab. The dynamic radius proxy ensures that all RADIUS traffic is sourced from the virtual controller IP address and not from the individual IP addresses of each Instant access point.
I know you will not be comfortable using port 80 and want to use 443, but this will cause an error. So the work around for this is to goto
Amigopod and on Administrator > Network Setup > Login Access page,select the Require HTTPS for guest access checkbox. With this setting enabling all attempts to access a guest Web Login or Self Registration page will automatically be directed to HTTPS if not already using this protocol.
Regards,
Sathya
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thought i made it clear in this post that you have to use port 80. I was thinking you were already doing that. Anyways, it good to hear that the issue is resoved.
Regards,
Sathya