Controllerless Networks

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
Occasional Contributor II

Aruba Instant - Bandwidth Allocation based on AD Account

Hi All,

 

We have Aruba Instant APs with Central.

We would like to allocate bandwidth to the users based on the AD Accounts.

Is this something we could achieve?

Thanks.

Highlighted

Re: Aruba Instant - Bandwidth Allocation based on AD Account

What RADIUS server are you using?

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Highlighted
Occasional Contributor II

Re: Aruba Instant - Bandwidth Allocation based on AD Account

I watched a video that it could be done with Aruba Clearpass.

https://www.youtube.com/watch?v=BXa7zdbPU9c

Could it be done with Microsoft NPS?

Thanks.

Highlighted

Re: Aruba Instant - Bandwidth Allocation based on AD Account

Yes you can. Please refer to the following thread:

https://community.arubanetworks.com/t5/Controllerless-Networks/IAP-single-SSID-different-roles-based-on-AD-OU-membership/td-p/303711

 

In your roles, you can assign different BW limits.

 

The link for VSA configuration:

https://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-i-go-about-in-doing-Vlan-derivation-against-Microsoft/ta-p/184848

You can use:

Aruba-User-Role                 1      String   Aruba      14823

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Highlighted

Re: Aruba Instant - Bandwidth Allocation based on AD Account

If you have an option, go for ClearPass. A neat solution and day to day monitoring/troubleshooting will be a lot easier.

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Highlighted
Occasional Contributor II

Re: Aruba Instant - Bandwidth Allocation based on AD Account

Could you please share a document on how to install/configure Aruba Clearpass from scratch? and then link it to IAP on Central?

Also, any configuration example for what we would like to achieve?

Thanks.

Highlighted

Re: Aruba Instant - Bandwidth Allocation based on AD Account

Assuming you are installing it on a vmware  environment, you can refer to the following link:

https://www.arubanetworks.com/techdocs/ClearPass/6.6/InstallingOnVM_6.6_TechNote/Content/InstallOnVM_6.6/ESXinstallations.htm

 

Following links will be a good starting point for configuration:

https://www.youtube.com/watch?v=-SPiKgoBsmI

https://community.arubanetworks.com/t5/Security/How-to-map-access-to-a-specific-AD-Security-Group/td-p/309800

 

I would recommend contacting the local Aruba partner. They should be able to help you with the POC or any configuration help you may need. Depending on your requirements, they should be able to help you with the right HW scaling and licensing information.

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: