I've been trying to set up communication between Airwave 7.6.4 and an Aruba Instant 135 running 6.2.1.0-3.3.0 .
The Intant AP is one one network and Airwave is in another. There's arouter between both networks.
The topology looks like this:
I can ping Airwave from the Instant IP and viceversa, but my Instant AP doesn't add itself to Airwave.
I've been able to do this when they are on the same network, but not when they are in different networks.
I'm not using DHCP for Airwave Discovery.
Is there a way I can debug the Airwave process to see possible error messages? Have I made a mistake in my configuration?
[code]
ersion 6.2.1.0-3.3.0
virtual-controller-country MX
virtual-controller-key 00b8c6ee0177d469ccb1b195737864069d230bc99da8d09e54
name IAP
organization ABC
virtual-controller-ip 192.168.11.246
virtual-controller-vlan 1 255.255.255.255 192.168.11.5
syslog-level info
terminal-access
ntp-server 0.pool.ntp.org
clock timezone Central-America -06 00
rf-band all
ams-ip 192.168.130.12
ams-key 8b3428bd2d2d649061bc8875230f540ae32ac4978c75c443
ams-identity 2a33d053f24995dfca69bfe1311a5db9
..........................
wlan access-rule wired-instant
rule 192.168.11.247 255.255.255.255 match tcp 80 80 permit
rule 192.168.11.247 255.255.255.255 match tcp 4343 4343 permit
rule any any match udp 67 68 permit
rule any any match udp 53 53 permit
[/code]
#AP135