Mar 18 08:55:06 stm[1531]: rap_bridge_user_handler: 12137: rbs update: flags:1/2 aclnum:134 ip:192.168.1.104 mac:b4:43:0d:aa:9d:68 bssid:04:bd:88:f7:98:20 vlan:1 wired:0
Mar 18 08:55:06 stm[1531]: rap_bridge_user_handler: 12156: user entry created for '192.168.1.104' 'b4:43:0d:aa:9d:68'
Mar 18 08:55:06 stm[1531]: stm_start_acct_for_post_1xauth_user: 15045: not authenticated for sta 'b4:43:0d:aa:9d:68'
Hello,
First of all well done for the fantastic forum!
Sorry if this question is lame but I am new to IAP.
I have a problem with a very small network of IAP 103, with simple setup.
I am trying to configure a e-remote Broadlink device to connect to the network and control tvs etc using an AP on my mobile.
I have managed to connect the broadlink device sucessfully on other vendors Access points.
I can see the Bradlink device connected as a client to the IAP network from the portal sucesfully. However the data is being blocked from passing through between the mobile AP and Broadlink device.
I have attached AP Log all file.
From the logs I can see that the error is :
stm_start_acct_for_post_1xauth_user: 15045: not authenticated for sta 'b4:43:0d:aa:9d:68'
Do I have to configure a bridged user somewhere in the setup?
Thanks in advance.