I've set up VC IAP cluster on aruba IAP with version 6.5.4.0-6.5.4. I use the VC to provide DHCP on both SSID: guest and emp. My local network is 192.168.1.0/24. And no filtering/acl on SSID emp.
Every client on both SSIDs can go to local subnet server or Internet, but can't print (show offline) to printers in 192.168.1.0 although I've set SSID to broadcast-filter none and enable airprint and airplay. Also I can ping from wlan client to that printer server. Please advise.
My configuration (excerpted from backup.cfg):
arm
wide-bands 5ghz
80mhz-support
min-tx-power 12
max-tx-power 21
band-steering-mode prefer-5ghz
air-time-fairness-mode default-access
client-aware
scanning
client-match
wlan ssid-profile emp
enable
index 0
type employee
essid emp
wpa-passphrase dfeef2c86663320963fa20ceda27045c3146f30a7c982d98
opmode wpa2-psk-aes
max-authentication-failures 0
vlan guest
rf-band all
captive-portal disable
dtim-period 1
broadcast-filter none
dmo-channel-utilization-threshold 90
local-probe-req-thresh 0
max-clients-threshold 64
ids rogue-containment
ids
wireless-containment none
infrastructure-detection-level medium
client-detection-level medium
infrastructure-protection-level low
client-protection-level low
wired-port-profile default_wired_port_profile
switchport-mode trunk
allowed-vlan all
native-vlan 1
shutdown
access-rule-name default_wired_port_profile
speed auto
duplex full
no poe
type employee
captive-portal disable
no dot1x
enet0-port-profile default_wired_port_profile
uplink
preemption
enforce none
failover-internet-pkt-lost-cnt 10
failover-internet-pkt-send-freq 30
failover-vpn-timeout 180
airgroup
enable mdns-only
multi-swarm
airgroupservice airplay
enable
description AirPlay
airgroupservice airprint
enable
description AirPrint
cluster-security
allow-low-assurance-devices
When I used show ap datapath session table, would appear:
192.168.1.152 is priner ip server. IAP physical ip address is 192.168.1.200.