Controllerless Networks

last person joined: 20 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Client filover on redundant ISP

This thread has been viewed 3 times

  • 1.  Client filover on redundant ISP

    Posted Feb 18, 2017 12:31 AM

    Hi,

    We have instant 225 with 2 SSID configured on each IAP. Can we do ISP failover for single SSID through IAP. Our L2/L3 switch could not capable for failover.

    Instant PBR.png



  • 2.  RE: Client filover on redundant ISP
    Best Answer

    EMPLOYEE
    Posted Feb 18, 2017 02:15 AM

    You would only be able to do this for a Virtual Controller assigned VLAN, because all of the traffic would go through the VC (Master IAP), and uplink management can really only be done on the VC if you want the traffic to be managed at only one point.  Please see here: http://www.arubanetworks.com/techdocs/Instant_423_WebHelp/InstantWebHelp.htm#UG_files/Uplink_conf/Uplink Interface Configuration.htm%3FTocPath%3DUG%2520topics%7CUplink%2520Configuration%7C_____1