Controllerless Networks

last person joined: 5 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Configure LACP for the Wireless AP

This thread has been viewed 3 times

  • 1.  Configure LACP for the Wireless AP

    Posted Aug 24, 2019 09:44 AM

    Dear All

    Can I configure the wireless AP port for the LACP to the PoE Switch. If Yes please guidance and I new in Aruba AP.

     

    Controller Firmware: ArubaOS 8.3.0.6

    AP Model: Aruba 345



  • 2.  RE: Configure LACP for the Wireless AP

    Posted Aug 24, 2019 11:00 AM
    Configure the switch ports to Lacp trunk and connect both cables to the ap. The AP knows when booting there is a lacp trunk. I think you can also config it manual but I think this is mutch easyer


  • 3.  RE: Configure LACP for the Wireless AP

    Posted Aug 24, 2019 11:20 AM

    Hi Expert

     

    Thanks for the explanation and how should I verify the LACP Trunk on the AP side.



  • 4.  RE: Configure LACP for the Wireless AP
    Best Answer