Controllerless Networks

Reply
Occasional Contributor I

Different WLAN signal strength in same AP

My wireless environment is one 7030 controller with 23 APs, all the 23 ap in the same AP group .there are 3 virtual AP profiles  (which mean WLAN) before ,I deploy  the new virtual AP profiles called test  with certificate authentication login recently . I find the laptop connect to new  WLAN (name is test ) signal strength is weaker than other three WLAN .Is there any troubleshoot procedure should i do ?

Any response would be highly appreciated!

Highlighted
Guru Elite

Re: Different WLAN signal strength in same AP

What  software are you using to measure signal strength?  Are you measuring the same band on the same access point?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars

Re: Different WLAN signal strength in same AP

Also note if you are associated to one of the ESSIDs you are surveying, that one will generally appear to have a stronger signal strength than others. THe best way to measure is to use certified radios as the sensor (Ekahau, AirMagnet, etc) and either survey each in active mode (associated) or all in passive mode (not associated to any ESSIDs).

 


Jerrod Howard
Distinguished Technologist, TME
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: