Controllerless Networks

Reply
Highlighted
New Contributor

Facebook WiFi, client token problem

Hello guys,

I have a request for you. We are not able to install facebook wifi on 100% for all our customers. Sometimes the installation will be fine, sometimes we can not sign up with a Facebook location announcement on the FREE wifi network. The page writes "Failed to authenticate client token. Please try again ,,

Facebook sites have a location, we are administrators. It is very weird and we did not even prefer any special settings. Only new aruba after reset, configuring guest network with facebook but it does not work. The only thing that networks are different is customer routers. What must be allowed on the router to make it work as it should? Please help, thank you all

 

aruba FW 6.5.3, IAP 207, but IAP 305 have some problem

New Contributor

Re: IAP 207 - Facebook WiFi, client token problem

Hi

I found out that there is probably a problem with mikrotik routers. Probably a rule with a firewall. Will anyone know? Otherwise, Aruba 205 also does not work or older firmware. Once I change the router so it works. Thank you for your advice

New Contributor

Re: IAP 207 - Facebook WiFi, client token problem

Hi,
So it will also not be in the router setup. Anyone have any ideas? Can someone try it? Thx

New Contributor

Re: IAP 207 - Facebook WiFi, client token problem

I just add my answer because it could help someone else.

I had the same problem on a IAP-205, configured for a Guest Wifi only with Facebook login.

Users could connect to this free wifi and load the Facebook login page, but after entering the bypass code they received an error page: "Failed to authenticate client token. Please try again".

I had a remote assistance with the technical support without success, then I decided to update the IAP firmware and DRT directly from its UI.

After this update the login process started working again!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: