We are deploying an Aruba Instant cluster in Europe, where the facility is HP switch/route. Here in the US we are 100% Cisco in that space, so I have no experience configuring an HP switch. We are setting up multiple VLANs to support AP management, internal production traffic and guest internet access.
The European facility currently has a flat network running on VLAN 1 and has no experience configuring multiple VLANs on HP gear. What I'm looking for is help converting our Cisco IAP port configuration to an HP port configuration as follows, where VLAN 1 is for AP management, VLAN 618 is production, and VLAN 619 is guest internet:
interface gi1/0/24
description Aruba AP
switchport trunk native vlan 1
switchport trunk allowed vlan 1, 618-619
switchport mode trunk
exit