Controllerless Networks

Reply
Highlighted
Occasional Contributor I

Hi, I see in the Visual RF Plan the 54mbps speed for ap 103 and can not use 300mbps does this AP use

Hi, I see in the Visual RF Plan the 54mbps speed for ap 103 and can not use 300mbps does this AP use only 54mbps and why the 300mbps is not present?

Highlighted
Guru Elite

Re: Hi, I see in the Visual RF Plan the 54mbps speed for ap 103 and can not use 300mbps does this AP

emeikle,

 

Are you using the Windows-based version of RF plan or the Airwave version?  If so, which version.  Please also attach a screenshot of what you mean.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor I

Re: Hi, I see in the Visual RF Plan the 54mbps speed for ap 103 and can not use 300mbps does this AP

Thanks I use the Windows software

 

Highlighted
Moderator

Re: Hi, I see in the Visual RF Plan the 54mbps speed for ap 103 and can not use 300mbps does this AP

What did you set as the speed when you created the building?


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
Occasional Contributor I

Re: Hi, I see in the Visual RF Plan the 54mbps speed for ap 103 and can not use 300mbps does this AP

 

300 Mbps, the problème is about the speed can not be set more than 54mbps ont the 103 ap provisionning if I use a 103H I can set it to 300. Anyway the result give no sens I manualy add the AP by looking on the coverage and signal strengt. The automatic provisionning is not realy reliable anyway!

 

Thanks

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: