Controllerless Networks

last person joined: 15 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Expand all | Collapse all

How to change the calledstationid in IAP UI

This thread has been viewed 2 times
  • 1.  How to change the calledstationid in IAP UI

    Posted May 04, 2016 10:23 AM

    I'm setting up Cucumber hotpspot on Aruba AP 225. IN one of the steps it is asked to change the  change the format of the calledstationid.

     

    From Cucumber..:

    In recent firmwares, you need to change the format of the calledstationid, commonly known as mac address.

    http://community.arubanetworks.com/t5/Controller-less-WLANs/Configurable-RADIUS-packet-format-11-in-IAP/ta-p/234110

    18:64:7x:cx:9x:1x (SSID Profile "cucumber") # auth-pkt-mac-format delimiter -  
    18:64:7x:cx:9x:1x (SSID Profile "cucumber") # auth-pkt-mac-format upper-case delimiter - 
    18:64:7x:cx:9x:1x # commit apply 
    18:64:7x:cx:9x:1x # write mem
    	

     In UI, iI'm not able to find this option.


    #AP225


  • 2.  RE: How to change the calledstationid in IAP UI

    Posted May 04, 2016 11:52 PM

    We can configure “mac-authentication-delimiter” and “mac-authentication-upper-case” on both WEBUI and CLI.

     

    But we can only configure “auth-pkt-mac-format { upper-case } { delimiter <delim> }” on CLI.



  • 3.  RE: How to change the calledstationid in IAP UI

    Posted May 05, 2016 12:48 AM

    Can you please point out where this options would be on UI.

     

    Model number: ARUBA AP225



  • 4.  RE: How to change the calledstationid in IAP UI

    Posted May 05, 2016 04:52 PM

    my apology but i communicated that this option would not be in UI:

     

    "can only configure “auth-pkt-mac-format { upper-case } { delimiter <delim> }” on CLI."