We have a problem, implemented 40 iap 103s with firmware 4.1.1.13
30 iaps are shown in the Instant VC, while the other 10 are not shown in VC
We checked - all AP's do have an IP in LAN via dhcp
We can ping those devices as well.
If we surf to onw of those 10 AP's IP adresses, we are redirected to the VC Iap his IP address.
The leds on those 10 iaps are as follow: poer and eth are green, 2.4ghz and 5ghz are orange.
Even if those 10 iaps came shipped with other firmware, after being connected as last to network, they should receive VC his firmware version. Corewct?