Controllerless Networks

New Contributor

IAP 205 network access just stops

We have setup a single IAP 205 as an access point and configured it with the latest firmware and it works ok for about 30 minutes, then wifi clients are unable to see the network. 


We we can still ping the AP but cannot ping the gateway or any other network devices when connected to wifi. From wired client we can ping everything.


It's like the AP becomes locked down or loses the gateway.


Any suggestions as to if I have missed a setting or what may cause the issue?

Search Airheads
Showing results for 
Search instead for 
Did you mean: