Controllerless Networks

Contributor II

IAP 225 cant setup

Hi Airheads


I can't configure an IAP 225, I did the factory reset pressing the reset button and through CLI but when it is ready I connect to the Instant SSID and the IP address assigned is and gateway I can't reach the gateway through ping tool. Please help me.


Best regards




Re: IAP 225 cant setup

Press and hold the reset button for 15sec while power you AP.

When is factory default you can connect the AP trough the ssid “setupme or instant” or connect via the lan and https to the IP of the accesspoint.

Be sure your AP isnt ZTP zero touch provisioned through or cloud central.
Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP | Ekahau ECSE Design - Was this post usefull, Kudos are welcome.
Search Airheads
Showing results for 
Search instead for 
Did you mean: