Controllerless Networks

Reply
Occasional Contributor I

Re: IAP-275 with OS 4.2 , Solid red Led and showing highest noise on RF dashboard

This had to be RMA'd.

Super Contributor I

Re: IAP-275 with OS 4.2 , Solid red Led and showing highest noise on RF dashboard

It should be noted that the 275 requires 802.3at power (the cisco 200 switch only supports af) and needs lldp enabled. Like the OP you should use a power injector if you have a switch that's only capable of af power, and more times than not the easiest way to make that work is to disable PoE on the switch port.

ACDX #419 | ACMP |
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: