Controllerless Networks

Reply
Highlighted
New Contributor

IAP-515 and IAP-535 Clustering

Hi All,

 

This is my first post, and i would like to ask if it is possible to cluster IAP515 and 535 with the same version 8.5.0.5?. Airwave is already integrated and Clearpass as well.


Accepted Solutions
Highlighted
MVP

Re: IAP-515 and IAP-535 Clustering

yes Instant version 8.5.x supports the AP-535 and AP-555s as well.

So you should be fine.

Make sure, your  Airwave has the firmware 8.5.0.5 for your AP-535 incase the AP-535 that you'll be adding does not have that firmware.


If a reply adequately addresses your issue, please click on the "Accept as Solution"

View solution in original post


All Replies
Highlighted
MVP

Re: IAP-515 and IAP-535 Clustering

yes Instant version 8.5.x supports the AP-535 and AP-555s as well.

So you should be fine.

Make sure, your  Airwave has the firmware 8.5.0.5 for your AP-535 incase the AP-535 that you'll be adding does not have that firmware.


If a reply adequately addresses your issue, please click on the "Accept as Solution"

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: