I have configure this succesfullly but i got 2 IAPS on the cluster and it just work in one of theml, what would i need to do to make it work on the others aps in the cluster??? it just soo odd
Also im using a controller which has PEFV license...
Do i need this to make this work? i dont have a controller that doesnt have that license so i cant really test....
The config is like this
Configured aruba ipsec pointing to the virutal ip on the firewall that points to the aruba controller
Configure in the routing table on iap the internal networks i want to see trhought he vpn
I create ont he DHCP a centrlized DHCP with a vlan of my corporate network that i want to extend on the remote site and split tunnel on
On the controller on the vpn service i just added the pool of ip addresses which vlan to the same vlan of the controller ip address.
On the IAP vpn role i assigned to the l2tp pool the pooli created in the step before.
Also i added the mac address on the RAP whitelist and also on the Branch whitelist(on this i did allow ALL)
After this the first AP i had worked perfectly
I added another ap to the cluster, and if i connect to the SSID that got the corporate vlan configured it doesnt work... and if i reconnect to the first AP it works.... so it doesnt work in one ap but works in the other...
Help!
Cheers
Carlos