Controllerless Networks

Reply

IAP in different Vlans with the same Virtual controlleur

Dear,

Can i command  IAP that belong to different VLAN with a  one unique virtual controller.

Regards


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]

Re: IAP in different Vlans with the same Virtual controlleur

Not possible but you could manage it through Airwave from a centralize perspective
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: IAP in different Vlans with the same Virtual controlleur

thank you but way ?


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Guru Elite

Re: IAP in different Vlans with the same Virtual controlleur

AirWave can manage and sync the configs of multiple virtual controllers. Aruba central can do this as well.

Sent from Nine

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
New Contributor

Re: IAP in different Vlans with the same Virtual controlleur

IAPs will look for their Master/virtual controller on the wire and in order to do this they need layer 2 connectivity.

if an IAP doesn't detect a VC it "elects" itself as master in its own cluster.

cheers

graeme
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: