Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP remote config.

This thread has been viewed 0 times

  • 1.  IAP remote config.

    Posted May 01, 2020 04:49 PM

    Now that I know how to convert a RAP into IAP remotely via the controller. I would like to see if they are any tips on how to convert the IAP into IAP-VPN and build a tunnel with a controller. 

     

    I do have an Airwave server setting on the corp network with private IP. I said private IP because if it was public, I can use Aruba activate, push the config to IAP and build a tunnel to the controller. 

     

    Thanks!

     

      



  • 2.  RE: IAP remote config.

    EMPLOYEE
    Posted May 01, 2020 07:18 PM

    There is no conversion needed for IAP to IAP-VPN.

    you need to configure it. here is the recent guide.

    https://asp.arubanetworks.com/downloads/documents/RmlsZTpjODVhZGMxZS02ZDY1LTExZWEtODU3My0xZmFkODFjYjlmNjM%3D



  • 3.  RE: IAP remote config.

    Posted May 04, 2020 10:42 AM

    I appreciate the link, very informative. I am not using Aruba Central, I have airwave--> controllers-->IAP as my setup. any ideas how implement IAP-VPN remotely with this setup?   



  • 4.  RE: IAP remote config.

    EMPLOYEE
    Posted May 04, 2020 12:09 PM

    Hi,

     

    I recommend you check this video that explains IAP-VPN configuration in detail.. If Airwave is used for management of IAPs, then configuration can be done from Airwave but the logic is the same..

    https://community.arubanetworks.com/t5/Video/IAP-VPN-DHCP-Options-Explained-Webinar/ta-p/647027



  • 5.  RE: IAP remote config.

    Posted May 04, 2020 01:19 PM

    I saw that video before. I probably missed something.  I will revisit and check back again.

     

    Thanks, Ayman!