Controllerless Networks

Frequent Contributor I

IAP105 led status

I've got 3 IAP105s setup and working. However, the LEDs on the units are not lit up. When they boot, the go through the LED sequence of blinking green while booting, red for not "up", but once everything is settled they turn off. Is this normal? How can I get them to stay on?

MVP Guru

Re: IAP105 led status

That is probably the option 'LED display' under System -> General -> Advanced Options:

2016-01-20 10_03_43-Instant.png

If disabled, the LEDS will turn of when the AP has succesfully booted. Default setting is 'Enabled', so someone should have changed that in your deployment.


If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
Showing results for 
Search instead for 
Did you mean: