Hello!
I tried to apply the user vlan in combination with the user role as DUR from Clearpass to IAP.
For this I used the type Radius:Aruba with Aruba-CPPM-Role and the value:
wlan access-rule vl20_allow-all
vlan 20
rule any any match any any any permit
This can be configured on instant cli and GUI.
But if I deploy this as DUR, the VC won't download the role.
I successfully pushed the role without the vlan.
To apply the vlan, I used a second enforcement profile with the Aruba-User-Vlan Attribute.
I found a similar described behavior at AOS here.
Is this expected on AOS and IAP?
Should it be as designed that vlans can not pushed with the DUR?
Thank you!