Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Lesson Learned: Firmware mismatch on multiple IAPs

This thread has been viewed 2 times

  • 1.  Lesson Learned: Firmware mismatch on multiple IAPs

    Posted Apr 04, 2015 03:27 AM

    I just received two IAPs (a 205 and a 215) and hooked them into a S1500-12P switch.

     

    Super annoying: I setup the IAP-215 as the primary VC, but the IAP-205 just would not show up, and would just reboot constantly.

     

    The IAP-215 had 6.4.2.0-4.1.1.0_45444 preloaded

    The ISP-205 had 6.4.2.0-4.1.1.0_46028 preloaded

     

    I upgraded both to 6.4.2.3-4.1.1.3_48994 and now both are visible from the GUI. Hooray.

     

    But c'mon, when I click on "Check For New Version" it says there are none. What gives?

     

    Anywho, hope this helps someone in the future.


    #AP205


  • 2.  RE: Lesson Learned: Firmware mismatch on multiple IAPs

    Posted Apr 06, 2015 09:33 AM
    Those are the same version, the 205 should have discovered the 215 VC.

    The "check for new version" checks the cloud and sometimes takes a few weeks before a new release is available in the cloud.