Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Managed switch on Instant Mesh Point

This thread has been viewed 0 times

  • 1.  Managed switch on Instant Mesh Point

    Posted Nov 07, 2018 03:59 AM

    I have an IAP-367 PtP mesh network and I can PING the mesh point across the mesh network from the LAN.  However I can't PING the managed switch (static IP addressing) directly connected to the mesh point.

     

    I have configured the mesh access points so their Ethernet ports are in trunk mode with a native VLAN of 100 with all VLANs allowed.  The uplink switch port is also configured for trunk with a native VLAN of 100 with all VLANs allowed.

     

    Any assistance with fault finding this issue would be greatly appreciated.



  • 2.  RE: Managed switch on Instant Mesh Point

    EMPLOYEE
    Posted Nov 07, 2018 09:10 PM
      |   view attached

    In the system > general settings, do you have the uplink switch native VLAN set for VLAN 100 as well?