Controllerless Networks

We have 2x IAP-315 in a cluster where we want to create seperate SSID's for 12 rooms

 

Both AP's are connected to a Aruba 2530-8G switch

Router has IP 192.168.1.1

 

Have created a SSID with virtual controller managed Client IP assignment. Chosen Custom Client VLAN Assignment and then created a new local DHCP scope. (Local, L2)

Ex network 172.16.110.0 / 255.255.255.0

Default router and DNS: 192.168.1.1

VLAN ID: 10 ( have tagged ports on switch - both ports connected to AP's and unlink port to router)

 

Not quite sure what to enter in VLAN IP and subnet mask
Tried with 172.16.110.1 / 255.255.255.0 and other things but it doesn't matter

 

Client connects without issues to SSID and gets correct IP assignments but cannot access internet

 

Have a missed something or should it be set up in another way

with Local-L2, the IAP will provide DHCP sevice but the default gateway is outside on the same subnet. so if your outside gateway is 192.168.1.1 then your dhcp scope in Local-L2 can be 192.168.1.0/24

 

regards

Sorry but that does make sense to me when you have to put in a vlan
Do you mean that every network I make should then have the same dhcp scope but different vlans

Med venlig hilsen

Kim Alsted
Teknisk Direktør
IT-Kompagniet

remember the default gateway for a subnet should be on that subnet. for example for subnet 172.16.1.0/24, the defult gateway can be 172.16.1.1 but it can not be 192.168.1.1