Controllerless Networks

last person joined: 19 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Proper L2TPv3 VPN Controller Configuration to Support IAP Tunnel

This thread has been viewed 1 times

  • 1.  Proper L2TPv3 VPN Controller Configuration to Support IAP Tunnel

    Posted Feb 12, 2018 01:00 PM

    Greetings,

     

    I am looking for some information on how to properly set up the subject configuration between a 3200 controller and a iap225, I also have tried a rap3 with no success as well. I have performed multiple searches but yet to find a complete explanation of the required configuration for both the controller and the iap ends of the connection. The main issue that I am having is where to configure the iap's l2tpv3 psk on the controller side. I added the iap mac to the whitelist, created the required pool, and from what I have read that's pretty much it. I have tried to bring up the tunnel but not seeing the controller responding. I am also not finding much help with commands to use to troubleshoot the l2tp vpn issue on the controller either.

     

    Controller info:

     #show version
    Aruba Operating System Software.
    ArubaOS (MODEL: Aruba3200-US), Version 6.4.3.9
    Website: http://www.arubanetworks.com
    Copyright (c) 2002-2016, Aruba Networks, Inc.
    Compiled on 2016-05-27 at 14:02:53 PDT (build 55230) by p4build

     

    Any help or feedback would be greatly appreciated.

     

    Thanks in advance,

    Jaime