Hi,
first, im quite a beginner, so ill try to explain my problem as best as i can.
i am using a cluter active/passive of 7205 controller, with CAP (325 and 275).
i want to use some AP as RAP (bridge).
i enabled VPN services, i provisionned my AP as a remote AP with controller Public IP.
But it doesnt work.
i checked log on the controller, AP conencts, get an IP from VPN pool, but then after a minute it disconnects.
i can see in the logs that this repeats few time (7) before disconnecting
Feb 20 13:26:28 :124405: <4822> <DBUG> |authmgr| AUTH GSM: ADD bss b4:5d:50:11:b2:c1: event=0
Feb 20 13:26:28 :124202: <4822> <DBUG> |authmgr| add_bss_object(): Detected AP (f/l 0) with ip 172.28.40.3 slotport 8448 status 1 txkey 0
Feb 20 13:26:28 :124004: <4822> <DBUG> |authmgr| user_add_af_ap: ap_ip 172.28.40.3 ap->ref_count 5
Feb 20 13:26:28 :124004: <4822> <DBUG> |authmgr| logging role event for 0x1ee3a94: 0x148d4dc,0x1160014, index 6
Feb 20 13:26:28 :124004: <4822> <DBUG> |authmgr| user_download: User 172.28.40.3 Router Acl(0)
Feb 20 13:26:28 :124004: <4822> <DBUG> |authmgr| get_traffic_prio_from_role: |TC-PROF GET|: Profile Name (Default) Role name (sys-ap-role) val(15)
Feb 20 13:26:28 :124004: <4822> <DBUG> |authmgr| user_download: |TC-PROF|: Role (sys-ap-role) Traffic Prio(15)
Feb 20 13:26:28 :124163: <4822> <DBUG> |authmgr| download-L3: ip=172.28.40.3 acl=11/0 role=sys-ap-role, Ubwm=0, Dbwm=0 tunl=0x0x0, PA=0, HA=1, RO=0, VPN=0, MAC=00:00:00:00:00:00.
Feb 20 13:26:28 :124234: <4822> <DBUG> |authmgr| Tx message to Sibyte, blocking with ack, Opcode = 164, msglen = 556 2 user messages bundled, actions = 18, 20
Feb 20 13:26:28 :124004: <4822> <DBUG> |authmgr| add_bss_object: ap (172.28.40.3) bss->bssid.addr b4:5d:50:11:b2:c1 first_or_last is 0
and then after 50 seconds after last attempt IPSEC tunnel is down.
Can you help me find out whats wrong with my configuration?
im sure there is important information missing in what i said, then dont hesitate to ask me and ill try to be more precise.
Thanks