Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

[RAP109] Netgear A6210 only connects in A mode not AN

This thread has been viewed 0 times

  • 1.  [RAP109] Netgear A6210 only connects in A mode not AN

    Posted Oct 04, 2014 09:31 PM
      |   view attached

    Netgear A6210 only connects in A mode not AN.

     

    I even reinstalled the drivers for it and it still will only connect in A and not AN. It will sometimes connect in AN mode mabye 1/20th of the time. I haver two RAP 109s in roaming (cluster) mode

     

    Other clients connect in AN mode just fine like the phones, my laptops, etc....

     

     



  • 2.  RE: [RAP109] Netgear A6210 only connects in A mode not AN

    Posted Oct 12, 2014 08:03 AM

    then it is your device, if you have the latest drivers there is little else to do except perhaps get a new wireless card.



  • 3.  RE: [RAP109] Netgear A6210 only connects in A mode not AN

    Posted Oct 12, 2014 09:25 AM

    Well with the support call I went thru a firmware update that bricked one of the APs and I had to get another rep to help me TFTP a new OS image over and it was unbrcked and The rep also did some client match tweaking and it's ok for now... for now.