08-20-2015 09:08 AM - edited 08-20-2015 09:09 AM
I need some clarfication on iAP trasmit power to match that of the client device for a pre instal survey.
The iAP power is set using an EIRP value and we are given a mW rating for the client device (30mW).
I understand the calculation that goes into EIRP and that 30mW is equivelant to 15dBm. Is it as simple as setting the EIRP value to 15? Or am I missing some important math?
Solved! Go to Solution.
08-20-2015 09:11 AM
- Setting the power to the range of your clients is a good starting point. It is not necessarily a hard-and-fast rule.
- You are correct on your power assumption. You would set it to 15, yes.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars