Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Tunnel Node

This thread has been viewed 2 times

  • 1.  Tunnel Node

    Posted Dec 04, 2017 02:59 AM

    Dear All,

     

    I have controller running on AOS 6.5.4.3, type 7030,

     

    switch 2930F with stacking vsf with firmware 16.03,

     

    and clearpass as radius 802.1x wired,

     

    i have already configure 802.1x and successfully login with username at my active directory,

     

    but when I assign that port with tunnel node, it pop up notif, cannot enable tunnel node when port authenticator enable,

     

    i read in ase.arubanetworks.com tunnel node can enable with authentication 802.1x , where I am wrong the configuration ?

     

    Screenshot (678).png

     

    please advice....



  • 2.  RE: Tunnel Node

    EMPLOYEE
    Posted Dec 04, 2017 08:26 AM
    You cannot have the "aaa port-access authenticator" command configured for the port.


  • 3.  RE: Tunnel Node

    Posted Dec 04, 2017 11:18 AM

    Dear Cappalli,

     

    So , what should i do sir ?

     

    if I remove the aaa port auth, the device wont have authentication 802.1x ?

     

    kindly need your advice



  • 4.  RE: Tunnel Node

    EMPLOYEE
    Posted Dec 04, 2017 11:31 AM
    Please look at the ClearPass Solution Guide for Wired Policy Enforcement.