Controllerless Networks

last person joined: 18 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Viewing AP radio channel mode for Instant / Airwave

This thread has been viewed 2 times

  • 1.  Viewing AP radio channel mode for Instant / Airwave

    Posted Jul 02, 2015 10:55 PM

    Hi All,

     

    when using a mobility controller, you can run the show ap bss table command to identify the channel width and mode (i.e. HT20 / VHT80)

     

    What is the equivalent command for instant? Can this be seen in Airwave?

     

    Scott



  • 2.  RE: Viewing AP radio channel mode for Instant / Airwave
    Best Answer

    Posted Jul 03, 2015 01:55 AM

    HI Friend,

     

    You can use the same command ( show ap bss-table) to get this information, look at "PHY" column. Airwave do not have any such command.

     

    Please feel free for any further query on this.



  • 3.  RE: Viewing AP radio channel mode for Instant / Airwave

    Posted Jul 03, 2015 08:31 AM
    Hi scottdoorey,
    as Venu mentions, run 'show ap bss-table' on the CLI for both the controller and IAP.
    Venu, you can definitely run this command on Airwave.
    Simply Navigate to the IAP-VC that you are interested in and select the drop down "Run command for all APs" and select "AP BSSID Table".


  • 4.  RE: Viewing AP radio channel mode for Instant / Airwave

    Posted Jul 05, 2015 05:08 PM

    thanks all for the responses. Looks like i'll be raising a feature request!