Controllerless Networks

Reply
New Contributor

We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.Is tere any configuration settings that could be modified?

Guru Elite

Re: We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

Can you see all access points in the cluster from the Virtual Controller?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

yes, we are able to see all the Accesspoints, but the clients are getting associated with only two AP's which are IAP 105 rest of the AP's in the cluster are IAP 93 model.

We had done a recent Upgrade from 6.2.0.0-3.2.0.0_36559 to 6.4.2.6-4.1.1.6_50009 and only after the upgrade we see these issues.

As a workaround we had downgarded the firmware post which we could see the clients getting associated with all the AP's.

Guru Elite

Re: We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

From the Aruba Instant 6.4.2.6-4.1.1.6 | Release Notes

iap-93.png

If you are using EAP Termination that might explain why there are no users on the IAP-93s.  The IAP-93s have limited memory and they have been marked end-of-sale since April 30th, 2014 http://www.arubanetworks.com/support-services/end-of-life/

 

If you need the functionality on those APs, I would downgrade so that you do not lose any features.

 

 

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

WPA2-Personal is the security mechanism we use for our WLAN.

Does the new firmware affect the WPA2-Personal also?

Guru Elite

Re: We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

Do you have Mac authentication enabled?

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: We've 11 AP's in Cluster[Model105],but clients associated with only two AP's.

MAC Authentication is disabled.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: