Controllerless Networks

last person joined: 21 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

how can i connect AP-125 and config

This thread has been viewed 0 times

  • 1.  how can i connect AP-125 and config

    Posted Apr 11, 2014 01:13 PM

    i'm using AP-125 for frist time

    so need help to connect Ap-125 to pc by console cable and what software i need to config it

    thats the frist time i use the console config so plz help me



  • 2.  RE: how can i connect AP-125 and config

    EMPLOYEE
    Posted Apr 11, 2014 01:14 PM

    You need a controller for the AP125 to work....



  • 3.  RE: how can i connect AP-125 and config

    Posted Apr 11, 2014 01:22 PM

    what a controller ? is it software 

     



  • 4.  RE: how can i connect AP-125 and config
    Best Answer

    Posted Apr 11, 2014 02:00 PM

    you will need to point that AP to a controller.

    Using a console cable using putty : http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

     

    and then you have the following commands: 

    http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/How-can-i-convert-an-AP105-as-remote-ap-from-apboot-prompt/m-p/137475/highlight/true#M29332



  • 5.  RE: how can i connect AP-125 and config

    Posted Apr 11, 2014 02:07 PM
    @latashey2 wrote:

    what a controller ? is it software 

     


    The AP-125 cannot operate on its own; it needs a mobility controller as cjoseph suggests.   The mobility controller is an appliance that centrally manages campus based access points (including the AP-125).

     

    http://www.arubanetworks.com/products/mobility-controllers/