Controllerless Networks

Reply
New Contributor

is it possible to have APs with different country codes linked to the same Master VC?

See Subject Header.

Guru Elite

Re: is it possible to have APs with different country codes linked to the same Master VC?

Since the country code is set at the VC, that would be no.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: is it possible to have APs with different country codes linked to the same Master VC?

I two US APs in my Home lab and one Worldwide. The US versions is of cause
fixed and one of those is the one I prefer to be VC.
At what level does the discovery protocol for Joining run? I suspect L2. Is
that correct.

If I can not use all my APs in the samr VC I will end up with 2 VCs
(correct ?)

Even by using two different IP subnets will this will still cause problems
if the are on the same VLAN? Actually default VLAN.

I f was to simulate solution with 2 APs in the US and one in a remote
network in EU linked to the same network, what do I need to do?
Aruba Employee

Re: is it possible to have APs with different country codes linked to the same Master VC?

It will not join the cluster of the existing VC nor it'll become a separate VC. You need to convert it to standalone mode and use it with a different country code on the same VLAN. 

Thanks,
Rajaguru Vincent
CWNA | CWSP | CWAP | CWDP | ACMP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: