Controllerless Networks

Reply
New Contributor

is it possible to mesh an IAP205 with an IAP105?

Is it possible to mesh an IAP205 with an IAP105?

I appreocate that they would both need the same firmware and only one IAP has a cable connection.

Thanks in advance.

Guru Elite

Re: is it possible to mesh an IAP205 with an IAP105?

And they would need to be running 4.2.x.x firmware, is the last requirement.

 

That software can be obtained here:  http://support.arubanetworks.com/LifetimeWarrantySoftware/tabid/121/DMXModule/661/Default.aspx?EntryId=20375


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: