Upstream VRRP / HSRP routers and Aruba/HP 2530-24G Switch (J9776A) switch
12-03-2018 09:19 AM
We have an uplink provider which comes to us with two routers using VRRP or HSPR.
I connect both of them into Aruba switch and provider technician told, that they cannot communicate with each other. We test both - HSRP and VRRP.
Both ports are untagged with the same VLAN.
For the test, also I used dumb $5 switch and, in this case, everything works perfectly.
My thoughts were - VRRP and HSRP both using multicast and our switch blocks multicast.
Can somebody check our configuration and check, where I got wrong?
I quite new to HPE/Aruba, before I working mainly with Cisco.
The switch is HP 2530-24G Switch (J9776A),
ARUBA24-2# sh ver
Image stamp: /ws/swbuildm/rel_xanadu_zeus_qaoff/code/build/lakes(swbuildm_rel_xanadu_zeus_qaoff_rel_xanadu_zeus)
Sep 5 2018 11:47:06
Boot Image: Primary
Boot ROM Version: YA.15.20
Configuration (I cut rest VLANs, I used VLAN 990 for connecting provider equipment):
; J9776A Configuration Editor; Created on release #YA.16.07.0002; Ver #14:01.44.00.04.19.02.13.98.126.96.36.199.28.f3.84.9c.63.ff.37.27:45 hostname "ARUBA24-1" trunk 25-26 trk18 lacp no telnet-server no web-management web-management ssl ip default-gateway ***** **** here cut rest VLANs **** vlan 990 name "Provider lines" untagged 15,17,19,21 no ip address exit spanning-tree no tftp server no dhcp config-file-update no dhcp image-file-update no dhcp tr69-acs-url
Can somebody check, what is wrong with my configuration?
Thank you in advance,
Prague, Czech Republic.