Is there a way to send specific syslog messages as SNMP Traps on a 2930m switch? I thought I read it somewhere that you could but I've dug and dug and can't seem to find it.
Thanks gang.
Jim
Hi Jim,
Yes there is such option. You can send the log messages as SNMP traps to the SNMP server.
For SNMP version 2:
Aruba(config)# snmp-server host [ ipv4-addr | ipv6-addr ] community name
[ none | all | not-info | critical | debug ]
Please look into the below link for more details:
https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8160_ssw_mcg/content/ch06s10.html#s_Configuring_an_SNMP_trap_receiver_CLI_i139206
If you have further queries, please reach out to the Aruba tech support team.
Thanks! I continued digging and actually discovered the documentation a few minutes after I posted! Tested and works.Thanks again!
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.