Hi guys,
I have a network where 2 Cisco switches (not stacked). They are behind a firewall and the only way to get to them is to SSH into the firewall and then telnet into the switch.
The only outside port that is open to the switches is SNMP using PAT.
60161 -> 161 Switch 1
60162 -> 161 switch 2
On Airwave, I add a new device (Cisco Catalyst Switch), put in the right public IP (Static), SNMP port, etc... Switch 1 gets monitored just fine.
Switch 2 fails on SNMP.
1. They both have the snmp com string.
2. Airwave (from CLI) can snmpwalk the 2nd switch just fine.
3. Switch 2 settings are exactly the same as Switch 1 except the SNMP port is 60162 vs 60161.
Which logs can I look at in Airwave to find out why it is failing? If any...