Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
I am trying to figure out why Airwave is not showing the SNR info under RF Performance. Health and Speed are shown but SNR is not.
I am using the default-amp profile on all Aruba controllers (ArubaOS 6.4.0.1) and Airwave 8.0.1.
Any suggestions as to where to look for troubleshooting?
Thanks!
AMON is enabled in Airwave. I have also setup Airwave as the mgmt-server on the controllers using the default-amp profile.
OK, I changed "Prefer AMON vs SNMP Polling" from Yes to No, and now I am getting the SNR info. Not sure why that fixes things...
There is no firewall stopping UDP 8211 traffic between Airwave and the controllers. I am not sure what else would be stopping AMON from working correctly.
I have confirmed there is no firewall stopping PAPI traffic.
I did check the mgmt-server counters before and they showed messages being passed as I would expect.
Going to try upgrading AMP to the latest version and see if it makes a difference.
Upgrading to AMP 8.0.5 appears to have resolved the issue.
Thanks for your help!
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.