07-07-2018 04:53 AM
Thank you for your advice.
The default boot option of the server is UEFI for this hardware, but we have changed it to Legacy BIOS but still the issue is same with both 220.127.116.11 and 8.2.5.
Thanks and regards,
07-09-2018 09:21 AM - edited 07-09-2018 09:23 AM
Scratch that - found it earlier in the thread - checking with the support team.
So we're sort of on the right track, unfortunately - I don't have that server model in the lab to test against. Can you send me the case number you have open with support?
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
07-10-2018 12:30 AM
Thanks a lot for your help.
First we have installed the CentOS6.9 as suggested by the TAC engineer and then connected the system to the Internet and have given remote (SSH) to TAC engineer.
He installed the same ISO 18.104.22.168 AMP version on top of CentOS and now my application is successfully installed and working fine.
Ashok Kumar S.